You can buy a 5-lb bag of polymetallic nodules from the Clarion-Clipperton Fracture Zone on Amazon, right now.
Depending on your vantage point and how long you’ve participated
in the deep-sea mining community, this will either come as a huge surprise or be
completely unexceptional. Prior to the formation of the International Seabed
Authority, there were no international rules governing the extraction of
seafloor resources from the high seas. Multiple nations as well as private companies
were engaged in exploration to assess the economic viability of extracting
polymetallic nodules and tons of material was recovery from the seafloor for
research and analysis. Some of that material almost certainly passed into
private hands.
One of the reasons 3D printing exploded seemingly overnight a decade ago has a lot to do with the RepRap project, an initiative to build a fully open-source and largely 3D-printable 3D-printer. The idea of a machine that could replicate itself was pulled straight from the pages of science fiction, and yet, here were machines–janky, kludgey, barely functional, machines–assembled from parts clearly fabricated by those same machines. They were conceptually impressive, but not a particularly awe-inspiring sight to behold.
And then came Josef Průša and the Prusa Mendel.
Affectionately known as the Ford Model T of the 3D printing world, the Prusa Mendel was the first of the open-source 3D printers that was designed to be easily mass produced. It looked good and it ran great. Released under an open-source license, it was replicated and iterated on a massive scale. That didn’t prevent Průša from building a successful company. The current Prusa i3 MK2 is among the most successful desktop 3D printers in the world, and certainly one of the best.
Clocking in at $197.69, the Anet A6 is the most expensive printer in this review series. It’s also the biggest, with a massive 220mm by 220mm by 250mm build area. It’s an upgraded version of the popular Anet A8, with a larger build volume and a better user interface, but not much else. From reviews, this printer seemed like a solid representation of what you can get at the top end of the menagerie of sub-$200 Prusa i3 clones. It (and its smaller A8 brother) certainly have the fan-base and hacking community to support its reputation.
Anet A6, working hard. Photo by author.
This acrylic-framed beast ships as a kit, so expect to spend half a day putting this printer together.
If you’re going off of dollar per cubic millimeter, this is the best bang for you buck by a wide margin. And that’s about the extent of the good things I have to say about this machine.
Monoprice is an interesting organization. They’re a rebadging company that seeks out unbranded or off-brand products, makes a few tweaks, and then sells them to secondary markets under their own brand. They made their mark in the early 2000s selling good, cheap cables and have expanded from there. You can find headphones, cookware, cables, computer accessories, and, of course, 3D printers, under the Monoprice label. But that doesn’t mean their products are cheap knockoffs. Monoprice has a reputation for finding quality equipment.
The Monoprice Mini Delta is a rebadged Malyan M300. From the specs, it doesn’t look like Monoprice changed anything but the logo, and that’s a good thing. Malyan printers have a great reputation.
This is a delta printer, which means rather than having independent X, Y, and Z-axes, three identical stepper motor arrays work in tandem to control the position of the extruder while the bed itself remains stationary. It uses a Bowden-style extruder that keeps the weight on the printhead down. It has an aluminum frame with steel structural elements. The relatively small circular print area is 110 mm diameter by 120 mm height. Controls are integrated into the printer and it allegedly has WiFi capability through an app.
The Niskin bottle, a seemingly simple device designed to take water samples at discrete depths, is one of the most important tools of oceanography. These precision instruments allow us to bring ocean water back to the surface to study its chemical composition, quality, and biologic constituency. If you want to know how much plastic is circulating in the deep sea, you need a Niskin bottle. If you need to measure chemical-rich plumes in minute detail, you need a Niskin bottle. If you want to use environmental DNA analyses to identify the organisms living in a region of the big blue sea, you need a Niskin bottle.
Niskin bottles are neither cheap nor particularly easy to use. A commercial rosette requires a winch to launch and recover, necessitating both a vessel and a crew to deploy. For informal, unaffiliated, or unfunded researchers, as well as citizen scientists or any researcher working on a tight budget, getting high-quality, discrete water samples is an ongoing challenge.
Why does life exist? Its an age old question that has been debated for centuries with popular hypotheses crediting celestial interference, a primordial soup, or a colossal stroke of luck. However, a relatively recent and provocative hypothesis suggests luck has nothing to do with it, and that instead, life is an inevitable consequence of physics.
The author of the concept, Jeremy England – professor of biophysics at MIT, suggests, “the origin and subsequent evolution of life follow from the fundamental laws of nature and should be as unsurprising as rocks rolling downhill.”
In November of 2018 Aquatica Submarines shipped a three person submarine, Stingray 500, across frosty North America on the back of a truck then over the rolling winter seas of the Gulf of Mexico to Belize aboard the R/V Brooks McCall. Our destination was a site located 7 miles into Lighthouse Reef – a perfect sinkhole in the ocean known as the Great Blue Hole. We traveled to this UNESCO World Heritage site to explore and document a geologic phenomenon in support of conservation science and to conduct outreach. Our mission was two fold, map the Great Blue Hole using high resolution sonar and take people worldwide on this journey with us on broadcast TV. Everything we collected, from CTD data and dissolved oxygen content, to video footageand experiential data, gives us the fodder we need to tell a story about an unusual place on our planet most people have never seen, until now.
Photo courtesy Aquatica Submarines.
Geology from not-a-geologist
Over the past 14,000 years the polar ice caps, formed during the last glacial maximum, have thawed and raised sea level in steps. These defrosting events are captured in a stone record of an oceanic sinkhole in Belize. The aptly named Great Blue Hole is a collapsed cave, filled with stalactite caverns, and built up from layers of fine limestone and rougher calcium carbonate walls. The stepped rise of sea level can be seen in the form of terraces carved deeply by erosion into the otherwise vertical rock walls. Straight vertical stretches of wall are free of erosion because sea level rose rapidly during a few brief decades between each step. As each melting event took place sea level rose dramatically, as much as 100 feet in 100 years, followed by centuries of stability. Preserved from the disturbance of time, and isolated in the darkness, the hole holds clues to a very natural part of our planet’s life cycle. It’s these terraces and stalactites we set out to map.
Underwater mud volcanoes in the Flower Garden National Marine Sanctuary in the Gulf of Mexico. Escaping gas can be seen rising from the mud volcano. PC: Sea Research Foundation (SRF) and the Ocean Exploration Trust (OET).
